Learn the correct way to rename drawing files using Project Manager, and why you must use this method rather than Windows Explorer.
- [Instructor] Renaming your models is very…straightforward using Project Administrator,…but there's a few rules we have to follow to make sure…that our files remain associated with the current project.…Let's take a look at Project Manager,…and look for the file name, To Be Renamed.…So what I'm going to do is rename this file.…What I'm going to show you is I'm going to browse out to Windows,…and I'm going to look at Desktop, Exercise Files, Chapter 02.…I'm going to look under our Plant 3D Models here…and inside our Piping folder.…
So, you'll see here that the file is called, To Be Renamed,…and it's also To Be Renamed in here.…So now, I'm going to come back and…make the change inside Project Manager.…It's always, remember,…you'd make these types of changes inside this window.…So to do that, I'm going to highlight…the drawing I want to rename.…I'm going to right-click,…and you can see the option here to rename that drawing.…So, I'm just going to change this up here,…and I'm going to call this 02_03_PIPING…and I'm going to say OK.…
Author
Irene Radcliffe
Released
9/14/2017- Setting up the Plant 3D workspace
- Using on-screen tools
- Working with Plant 3D files
- Creating a new model
- Importing an existing Plant 3D file into a project
- Locating missing drawing files
- Creating a structural grid
- Working with the structural steel component
- Creating equipment
- Basic pipe routing
- Moving and copying data
- Locating components using Data Manager
- Linking P&ID line information to your 3D model
- Orthographic drawings
- Isometric drawings
Skill Level Beginner
Duration
Views
-
Introduction
-
Welcome58s
-
-
1. Getting Started
-
Opening a Plant 3D model2m 30s
-
Using on-screen tools3m 17s
-
2. Working with Plant 3D Files
-
Renaming drawing files2m 42s
-
3. Structural Steel
-
Structural steel overview3m 42s
-
Creating a structural grid3m 41s
-
Placing structural beams6m 52s
-
Editing structural beams6m 52s
-
Placing ladders3m 5s
-
Placing railings2m 35s
-
Placing footings1m 18s
-
-
4. Equipment
-
Equipment overview2m 31s
-
Creating equipment4m 50s
-
Adding equipment trim3m 8s
-
Equipment templates3m 38s
-
-
5. Piping
-
Piping overview6m 25s
-
Basic pipe routing7m 59s
-
Route pipe from equipment8m 51s
-
Adding branches8m 9s
-
Adding valves12m 35s
-
Adding instrumentation3m 46s
-
Pipe supports5m 21s
-
Sloped piping2m 59s
-
Insulated piping3m 42s
-
-
6. Modify and Reuse Piping
-
Hiding and isolating parts2m 35s
-
Assign new line numbers5m 45s
-
Connecting to xrefs4m 31s
-
Custom Parts Builder6m 46s
-
7. Data Manager
-
Data Manager overview5m 1s
-
Modifying tag data3m 34s
-
Using Data Manager filters2m 48s
-
-
8. P&ID
-
P&ID overview3m 48s
-
-
9. Orthographic Drawings
-
Orthographic overview2m 36s
-
Create adjacent views5m 21s
-
Bill of Materials5m 27s
-
-
10. Isometric Drawings
-
Isometric overview5m 26s
-
Touring the interface4m 18s
-
Reference dimensions5m 36s
-
Lock and issue a line5m 11s
-
PCF to isometric2m 59s
-
-
11. Project Tools
-
Validation settings5m 35s
-
Exporting to AutoCAD4m 6s
-
-
12. Report Creator
-
Report Creator overview8m 34s
-
-
Conclusion
-
Next steps45s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Renaming drawing files