In this video, learn what to do when you have located a component in the drawing, and you want to see the data field in Data Manager.
- [Narrator] Searching for a particular valve…or instrument in a full set of plant models…is a pretty daunting task.…It used to mean searching all the lines…that have been modeled in every drawing in the project,…looking for that one specific component.…Watch how easy it is for us to locate the tags…in our drawing using Data Manager.…So, let's go ahead and we'll go open 07_04 DATA.…So, I'm going to come and open Data Manager on our desktop,…and I'm going to to make sure you're set…to Plant 3D Project Data,…and come down to look for the valves.…
So what I'm going to do, is I'm going to scroll through here,…and I'm going to look in the long description…until I find myself a placeholder valve.…So, there's two that we have here;…and if I want to find out where they are,…maybe I've placed them in here expecting…to have an updated vendor drawing for the actual component,…and I've forgotten to insert it.…And I see it listed here,…it's very easy to find in the model.…Just look for the line that it's situated on, come across…
Author
Irene Radcliffe
Updated
11/12/2018Released
9/14/2017- Setting up the Plant 3D workspace
- Using on-screen tools
- Working with Plant 3D files
- Creating a new model
- Importing an existing Plant 3D file into a project
- Locating missing drawing files
- Creating a structural grid
- Working with the structural steel component
- Creating equipment
- Basic pipe routing
- Moving and copying data
- Locating components using Data Manager
- Linking P&ID line information to your 3D model
- Orthographic drawings
- Isometric drawings
Skill Level Beginner
Duration
Views
-
Introduction
-
Welcome Updated50s
-
-
1. Getting Started
-
Opening a Plant 3D model2m 30s
-
Using on-screen tools3m 17s
-
2. Working with Plant 3D Files
-
2019 release bug1m 20s
-
Renaming drawing files2m 42s
-
-
3. Structural Steel
-
Structural steel overview3m 42s
-
Creating a structural grid3m 41s
-
Placing structural beams6m 52s
-
Editing structural beams6m 52s
-
Placing ladders3m 5s
-
Placing railings2m 35s
-
Placing footings1m 18s
-
-
4. Equipment
-
Equipment overview2m 31s
-
Creating equipment4m 50s
-
Adding equipment trim3m 8s
-
Equipment templates3m 38s
-
-
5. Piping
-
Piping overview6m 25s
-
Basic pipe routing7m 59s
-
Route pipe from equipment8m 51s
-
Adding branches8m 9s
-
Adding valves12m 35s
-
Pipe supports5m 21s
-
Sloped piping2m 59s
-
Insulated piping3m 42s
-
-
6. Modify and Reuse Piping
-
Hiding and isolating parts2m 35s
-
Assign new line numbers5m 45s
-
Connecting to xrefs4m 31s
-
Custom Parts Builder6m 46s
-
7. Data Manager
-
Data Manager overview5m 1s
-
Modifying tag data3m 34s
-
Using Data Manager filters2m 48s
-
-
8. P&ID
-
P&ID overview3m 48s
-
-
9. Orthographic Drawings
-
Orthographic overview2m 36s
-
Create adjacent views5m 21s
-
Bill of Materials5m 27s
-
-
10. Isometric Drawings
-
Isometric overview5m 26s
-
Touring the interface4m 18s
-
Reference dimensions5m 36s
-
Lock and issue a line5m 11s
-
PCF to isometric2m 59s
-
-
11. Project Tools
-
Validation settings5m 35s
-
Exporting to AutoCAD4m 6s
-
-
12. Report Creator
-
Conclusion
-
Next steps45s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Locating components using Data Manager