Being able to hide or isolate parts of your model makes the modeling process much easier. Learn how to work with these features in this video.
- [Instructor] While you're working in a 3D environment…particularly if you're working in a congested area…it can be difficult to get a clear view point on the area…that you're working in.…If you run into this situation then you probably will…we have a tool that allows us to select components…and either hide them…or isolate them to give us a clear working area.…So let's open our drawing 0602 Piping.…And I'm going to zoom into this model here…and I'm going to show you there is…two different commands we have for isolating and hiding.…
So to be aware there is an AutoCAD command…and there is also a command in Plant 3D.…If you isolate using the Plant 3D you have to unhide…using the Plant 3D command and if you use the AutoCAD one…then you have to end the isolation…using the AutoCAD command.…So for example if you want to get rid of this tank here…I'm just going to come, I'm going to select the tank…and I'm going to right click and the two different locations…that we have here, where we have this part hiding in…isolation this is the Plant 3D aspect.…
Author
Irene Radcliffe
Updated
11/12/2018Released
9/14/2017- Setting up the Plant 3D workspace
- Using on-screen tools
- Working with Plant 3D files
- Creating a new model
- Importing an existing Plant 3D file into a project
- Locating missing drawing files
- Creating a structural grid
- Working with the structural steel component
- Creating equipment
- Basic pipe routing
- Moving and copying data
- Locating components using Data Manager
- Linking P&ID line information to your 3D model
- Orthographic drawings
- Isometric drawings
Skill Level Beginner
Duration
Views
-
Introduction
-
Welcome50s
-
-
1. Getting Started
-
Opening a Plant 3D model2m 30s
-
Using on-screen tools3m 17s
-
2. Working with Plant 3D Files
-
2019 release bug1m 20s
-
Renaming drawing files2m 42s
-
-
3. Structural Steel
-
Structural steel overview3m 42s
-
Creating a structural grid3m 41s
-
Placing structural beams6m 52s
-
Editing structural beams6m 52s
-
Placing ladders3m 5s
-
Placing railings2m 35s
-
Placing footings1m 18s
-
-
4. Equipment
-
Equipment overview2m 31s
-
Creating equipment4m 50s
-
Adding equipment trim3m 8s
-
Equipment templates3m 38s
-
-
5. Piping
-
Piping overview6m 25s
-
Basic pipe routing7m 59s
-
Route pipe from equipment8m 51s
-
Adding branches8m 9s
-
Adding valves12m 35s
-
Adding instrumentation3m 46s
-
Pipe supports5m 21s
-
Sloped piping2m 59s
-
Insulated piping3m 42s
-
-
6. Modify and Reuse Piping
-
Hiding and isolating parts2m 35s
-
Assign new line numbers5m 45s
-
Connecting to xrefs4m 31s
-
Custom Parts Builder6m 46s
-
7. Data Manager
-
Data Manager overview5m 1s
-
Modifying tag data3m 34s
-
Using Data Manager filters2m 48s
-
-
8. P&ID
-
P&ID overview3m 48s
-
-
9. Orthographic Drawings
-
Orthographic overview2m 36s
-
Create adjacent views5m 21s
-
Bill of Materials5m 27s
-
-
10. Isometric Drawings
-
Isometric overview5m 26s
-
Touring the interface4m 18s
-
Reference dimensions5m 36s
-
Lock and issue a line5m 11s
-
PCF to isometric2m 59s
-
-
11. Project Tools
-
Validation settings5m 35s
-
Exporting to AutoCAD4m 6s
-
-
12. Report Creator
-
Report Creator overview7m 45s
-
-
Conclusion
-
Next steps45s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Hiding and isolating parts