From the course: AutoCAD Plant 3D Essential Training: User
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Creating an orthographic drawing
From the course: AutoCAD Plant 3D Essential Training: User
Creating an orthographic drawing
- [Woman] Now it's time to play a little. I'm going to create an Ortho from one of our 3D models. So I'm going to walk you through the steps to set up your models, your scales, and display options. So let's start by opening our 09 model, and we're going to come up to our ribbon menu and choose the Create Ortho Overview panel. So what we're going to do is create a new drawing, and we're going to call this 09_03_Ortho. So, I'm going to turn off our Paper Check, our Cut Lines, our Match Lines, and we're just going to take a look at setting up the views. First, let's come in to our 3D Model Selection, and we want to make sure that we have our Equipment and our Structural turned on. Let's start with just doing a top view, and I want to change this view here, where I'm going to just drag this out a little bit. I don't want to include this secondary tank in here, so let's just move this out right along here so that we can eliminate something... Just have this piping showing. That's what I…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
-
(Locked)
Orthographic overview2m 36s
-
(Locked)
Creating an orthographic drawing4m 8s
-
(Locked)
Creating, saving, and modifying views3m 33s
-
(Locked)
Create adjacent views5m 21s
-
(Locked)
Adding annotations and dimensions7m 26s
-
(Locked)
Bill of Materials5m 27s
-
(Locked)
Revisions and document control9m 18s
-
(Locked)
-
-
-
-