In Plant 3D, use parametric AutoCAD 3D shapes to build your equipment. In this lesson, create some new pumps and vessels to use in your model.
- [Instructor] To create equipment…inside the Plant 3D environment,…we access the equipment dialogue box…from the equipment panel in the ribbon menu.…From here we have access…to the same predefined equipment…such as pump, vessels, exchangers,…and also the basic 3D auto cad shapes…that we can use to build a representation of our equipment.…So let's start by opening drawing 04_02_EQUIP.…And once again I'm going to change our view into parallel.…And I'm going to come up to our equipment tab…and I'm going to choose create.…
I'm going to scroll down to where we have our pumps…and I'm going to choose a centrifugal pump.…Now let's take a look a the parametrics…that we have available here.…If you look at the graphic you can see the dimensions…that we have here correspond with…what we have in the parametric dialogue box here.…And we can make adjustments accordingly.…So what I'm going to do first is…I'm going to create the tag on here,…just going to click on the little window here…and it's going to open up this assign tag dialogue box.…
Author
Irene Radcliffe
Released
9/14/2017- Setting up the Plant 3D workspace
- Using on-screen tools
- Working with Plant 3D files
- Creating a new model
- Importing an existing Plant 3D file into a project
- Locating missing drawing files
- Creating a structural grid
- Working with the structural steel component
- Creating equipment
- Basic pipe routing
- Moving and copying data
- Locating components using Data Manager
- Linking P&ID line information to your 3D model
- Orthographic drawings
- Isometric drawings
Skill Level Beginner
Duration
Views
-
Introduction
-
Welcome58s
-
-
1. Getting Started
-
Opening a Plant 3D model2m 30s
-
Using on-screen tools3m 17s
-
2. Working with Plant 3D Files
-
Renaming drawing files2m 42s
-
3. Structural Steel
-
Structural steel overview3m 42s
-
Creating a structural grid3m 41s
-
Placing structural beams6m 52s
-
Editing structural beams6m 52s
-
Placing ladders3m 5s
-
Placing railings2m 35s
-
Placing footings1m 18s
-
-
4. Equipment
-
Equipment overview2m 31s
-
Creating equipment4m 50s
-
Adding equipment trim3m 8s
-
Equipment templates3m 38s
-
-
5. Piping
-
Piping overview6m 25s
-
Basic pipe routing7m 59s
-
Route pipe from equipment8m 51s
-
Adding branches8m 9s
-
Adding valves12m 35s
-
Adding instrumentation3m 46s
-
Pipe supports5m 21s
-
Sloped piping2m 59s
-
Insulated piping3m 42s
-
-
6. Modify and Reuse Piping
-
Hiding and isolating parts2m 35s
-
Assign new line numbers5m 45s
-
Connecting to xrefs4m 31s
-
Custom Parts Builder6m 46s
-
7. Data Manager
-
Data Manager overview5m 1s
-
Modifying tag data3m 34s
-
Using Data Manager filters2m 48s
-
-
8. P&ID
-
P&ID overview3m 48s
-
-
9. Orthographic Drawings
-
Orthographic overview2m 36s
-
Create adjacent views5m 21s
-
Bill of Materials5m 27s
-
-
10. Isometric Drawings
-
Isometric overview5m 26s
-
Touring the interface4m 18s
-
Reference dimensions5m 36s
-
Lock and issue a line5m 11s
-
PCF to isometric2m 59s
-
-
11. Project Tools
-
Validation settings5m 35s
-
Exporting to AutoCAD4m 6s
-
-
12. Report Creator
-
Report Creator overview8m 34s
-
-
Conclusion
-
Next steps45s
-
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Creating equipment