Using a number of methods, including tees, o-lets, and stub-ins, explore how to create branches in your existing pipe runs.
- [Instructor] Creating branches is easy with Plant 3D.…Using grips and dynamic input is the key…to creating the branches quickly and accurately.…Make sure that you're familiar with both these…on-screen tools and then we can get started.…So let's open drawing 05_04_PIPING.…I'm going to change our view here to parallel…and I'm going to go into our top view.…So I'm just going to run a couple of test runs here.…We're not going to use this piping that I'm going to create…and we'll delete it when we're done.…Just want to show you how the grips work.…
So for example I'm going to come up…and create this six inch run of pipe…and I'm going to draw from here to here.…Looking at the grips on this,…notice that if we highlight this pipe we have three grips.…We have the continue pipe here,…we have the option to create a branch,…and we have the continue pipe.…So if we're creating branches…I'm going to just continue my pipe here.…I'm going to drop it down and just…make a couple of connections with elbows here.…If I want to turn this into a branch and continue on,…
Author
Updated
11/12/2018Released
9/14/2017- Setting up the Plant 3D workspace
- Using on-screen tools
- Working with Plant 3D files
- Creating a new model
- Importing an existing Plant 3D file into a project
- Locating missing drawing files
- Creating a structural grid
- Working with the structural steel component
- Creating equipment
- Basic pipe routing
- Moving and copying data
- Locating components using Data Manager
- Linking P&ID line information to your 3D model
- Orthographic drawings
- Isometric drawings
Skill Level Beginner
Duration
Views
Related Courses
-
AutoCAD P&ID Essential Training: User
with Irene Radcliffe3h 36m Intermediate -
AutoCAD P&ID Essential Training: Administrator
with Irene Radcliffe3h 35m Intermediate -
AutoCAD 2018 Essential Training
with Shaun Bryant9h 51m Beginner
-
Introduction
-
Welcome50s
-
-
1. Getting Started
-
Opening a Plant 3D model2m 30s
-
Using on-screen tools3m 17s
-
2. Working with Plant 3D Files
-
2019 release bug1m 20s
-
Renaming drawing files2m 42s
-
-
3. Structural Steel
-
Structural steel overview3m 42s
-
Creating a structural grid3m 41s
-
Placing structural beams6m 52s
-
Editing structural beams6m 52s
-
Placing ladders3m 5s
-
Placing railings2m 35s
-
Placing footings1m 18s
-
-
4. Equipment
-
Equipment overview2m 31s
-
Creating equipment4m 50s
-
Adding equipment trim3m 8s
-
Equipment templates3m 38s
-
-
5. Piping
-
Piping overview6m 25s
-
Basic pipe routing7m 59s
-
Route pipe from equipment8m 51s
-
Adding branches8m 9s
-
Adding valves12m 35s
-
Adding instrumentation3m 46s
-
Pipe supports5m 21s
-
Sloped piping2m 59s
-
Insulated piping3m 42s
-
-
6. Modify and Reuse Piping
-
Hiding and isolating parts2m 35s
-
Assign new line numbers5m 45s
-
Connecting to xrefs4m 31s
-
Custom Parts Builder6m 46s
-
7. Data Manager
-
Data Manager overview5m 1s
-
Modifying tag data3m 34s
-
Using Data Manager filters2m 48s
-
-
8. P&ID
-
P&ID overview3m 48s
-
-
9. Orthographic Drawings
-
Orthographic overview2m 36s
-
Create adjacent views5m 21s
-
Bill of Materials5m 27s
-
-
10. Isometric Drawings
-
Isometric overview5m 26s
-
Touring the interface4m 18s
-
Reference dimensions5m 36s
-
Lock and issue a line5m 11s
-
PCF to isometric2m 59s
-
-
11. Project Tools
-
Validation settings5m 35s
-
Exporting to AutoCAD4m 6s
-
-
12. Report Creator
-
Report Creator overview7m 45s
-
-
Conclusion
-
Next steps45s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Adding branches