From the course: AutoCAD MEP Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding waterside equipment - AutoCAD MEP Tutorial
From the course: AutoCAD MEP Essential Training
Adding waterside equipment
Since we have a piping plan going, let's start filling up our mechanical room. To do that, we'll first need to go back and get some room names populated into our models, so we know where we're going. The objective of this video will be to change the display to Architectural, tag our mechanical room with the room tag, then switch back to MEP design. Then we're going to add a boiler, and we're going to check out the properties. So to get started, let's jump into our MEP mechanical drawing. Let's make sure our workspace is set for Architecture. With our workspace set to Architecture, let's zoom in on this room right here. Let's click on the Room Tag button and select Room Tag. I'm going to go ahead and select this room. I'm going to put my tag right up around here, just so it's out of the way. Mechanical room 131. That was a good guess. I somehow knew that was the mechanical room. I'm going to hit OK. I'm going to hit escape a couple of times. Now I'm going to go ahead and switch back to…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
(Locked)
Setting up a ducting plan2m 9s
-
Adding a rooftop unit3m 47s
-
(Locked)
Adding VAV2m 35s
-
(Locked)
Adding air terminals3m 10s
-
(Locked)
Routing ducts7m 25s
-
(Locked)
Adding dampers3m 34s
-
(Locked)
Adding equipment2m 34s
-
(Locked)
Adding waterside equipment3m 48s
-
(Locked)
Adding chilled-water piping3m 44s
-
(Locked)
Adding hot-water piping3m 1s
-
(Locked)
Adding valves2m 37s
-
(Locked)
Tagging HVAC plans4m
-
(Locked)
Creating schedules2m 13s
-
(Locked)
-
-
-
-
-
-