- [Instructor] With the sprinklers in place…we can start adding our mains and branch piping.…To do this we'll be using the threaded pipe…that is configured and a system that makes sense.…We'll first model our main run through Office 103,…then by using the sprinklers we have modeled in place…we'll start modeling our branch piping.…So to get started let's jump into AutoCAD MEP,…let's hit our pipe drawing.…I wanna start by just drawing a main run…right up through here.…We'll come down and then we'll come up our hallway.…
To do that let's make sure…that our workspace is set for piping.…What I'd like to do now is on our tool pallet,…let's find gravity pipe.…Let's click our pipe button.…For our system let's make sure we're…on Fire Protection Wet Pipe.…Our routing preferences are set for threaded.…For the nominal size let's click the dropdown,…let's go down to four inches.…For our elevation let's go up to 12 feet.…
I'm gonna pick a point right here.…I'm gonna come straight down my building.…I'm gonna stop just before my vestibule,…
- Externally referencing architecture
- Setting up display configurations
- Adding room tags
- Setting up routing preferences and systems
- Adding piping and connectors
- Adding fire-alarm devices and control panels
- Creating sections
- Merging and refreshing sections
Skill Level Intermediate
Migrating from AutoCAD to Revitwith Paul F. Aubin2h 18m Intermediate
1. Setting Up the Sprinkler
2. Setting Up the Sprinkler Piping
3. Setting Up the Fire Alarm
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.