From the course: AutoCAD: Creating Sprinkler and Fire-Alarm Systems
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding fire alarm control panels
From the course: AutoCAD: Creating Sprinkler and Fire-Alarm Systems
Adding fire alarm control panels
- [Man] Fire alarm systems don't work well without control panels. What this video illustrates is where to find fire alarm control panels. We're gonna add one to the wall, and we're gonna tag it. Then we'll investigate the properties of the device. To get started, let's jump into AutoCAD MEP, and our control drawing. Let's switch our display configuration to our fire alarm configuration. And with that it turns on all of our ceilings, and looks a little different. What I want to do is let's come into the electrical room right here. Let's go to the equipment tab, let's click on electrical equipment. Under electrical, let's come down to control panel, and drill into that. Again, you can choose between a couple different ones. I'm gonna grab the one with a keypads operator. I'm gonna click into my drawing. I'm gonna shift, right click. And I'm gonna snap it to nearest. I'm gonna pick a point right here. I'm gonna go at 90 degrees up the wall. I'm gonna pick that point. Now I'm gonna hit…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
(Locked)
Creating fire alarm display configurations2m 39s
-
(Locked)
Adding fire alarm devices3m 25s
-
(Locked)
Tagging the devices2m 39s
-
(Locked)
Adding fire alarm control panels2m 39s
-
(Locked)
Adding the conduit3m 14s
-
(Locked)
Adding wires to the fire alarm setup2m 8s
-
(Locked)
Adding in schedules2m 33s
-
Adding the cable tray2m 58s
-
(Locked)
-
-