From the course: AutoCAD Civil 3D: Topographic and Boundary Survey
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Translating surveys - AutoCAD Civil 3D Tutorial
From the course: AutoCAD Civil 3D: Topographic and Boundary Survey
Translating surveys
- [Instructor] Let's take a look at the simplest method for translating a survey that's based in a drawing. What I have here are points one and two and the points I want to move them to are T1 and T2. We're going to take this in two steps. The first step will be simply moving all the survey information from point one to point T1. At that time, that fixes the horizontal point and the elevation of the translated survey location. So we want to check one thing before we do this. We want to type in O snap Z on the command line. When this value is set to zero, our snaps will pay attention to the Z elevation. And since we're wanting to translate this survey and it's going to be on adjusted datum, we want to make sure that we are picking Z values and not just assuming an elevation of zero. So I'll accept this value by pushing enter on the keyboard. And now I'm going to run the move command. Type move on the command line. Press enter. I'll window around my survey. Once I'm done selecting, I'll…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
Drawing a boundary3m
-
(Locked)
Labeling a boundary1m 42s
-
(Locked)
Creating tags and tag tables2m 43s
-
(Locked)
Using parcels2m 39s
-
(Locked)
Using Mapcheck2m 21s
-
(Locked)
Coordinate Geometry Editor2m 27s
-
(Locked)
Balancing a traverse2m 53s
-
(Locked)
Reports2m 54s
-
(Locked)
Translating surveys2m 27s
-
(Locked)
Translating a database2m 28s
-
-
-