From the course: Cert Prep Autodesk Certified Professional: Civil 3D for Infrastructure Design
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Modify a gravity parts list - AutoCAD Civil 3D Tutorial
From the course: Cert Prep Autodesk Certified Professional: Civil 3D for Infrastructure Design
Modify a gravity parts list
- [Instructor] In the last two videos, you learned a bit about parts list. Now let's take a look at how to configure your own by making some changes. Now to get started, I could either go to the modify tab and then pipe network, and that will bring up the Pipe network tool bar, which includes the parts list drop down. A shortcut to that, if you're on some other tab is to just click one of the pipes in your Civil3D drawing. That'll bring up the contextual ribbon tab which has the parts list dropped down. From here, I'll click edit parts list, pick the parts list that I'd like to modify. In this case I'll pick storm sewer, and then click the edit button here. So as we discussed in the first video in this chapter, each one of these tabs, pipes and structures has a list of families and within each family is a list of sizes. So let's start on the pipes tab. And we may notice that there's this 21 inch pipe size. Let's take…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
-
-
(Locked)
Understanding gravity parts2m 28s
-
(Locked)
Set the gravity part catalog location2m 44s
-
(Locked)
Modify a gravity parts list5m 47s
-
(Locked)
Create gravity pipe networks8m 42s
-
(Locked)
Add gravity pipe networks to profile view3m 6s
-
(Locked)
Change the pipe network flow direction2m 4s
-
(Locked)
Annotate gravity pipe networks3m 34s
-
(Locked)
Modify a pressure parts list2m 46s
-
(Locked)
Set the pressure part catalog location1m 54s
-
(Locked)
Create a pressure network7m 20s
-
(Locked)
Add a pressure network to profile view53s
-
(Locked)
Annotate pressure pipe networks2m 5s
-
(Locked)
-
-
-