From the course: AutoCAD Civil 3D: Pressure Pipe Design
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Drawing a pressure network in profile view - AutoCAD Civil 3D Tutorial
From the course: AutoCAD Civil 3D: Pressure Pipe Design
Drawing a pressure network in profile view
- [Instructor] At some point, you'll need to show your pressure network in a profile view for either design or documentation purposes. Let's see how that's done. For this example we want to take the pressure network that goes from the existing water line and follows the road up until the end of our first phase. And we want to show that on this profile view. This is a profile view of Shady Ridge Lane, which is this road here. I do want to point out that the road stationing is increasing in this direction. And my profile is going in the opposite direction. So this is the beginning of the road. And this is the beginning of the profile. So things are going to be a mirror image of each other. So there's a couple of ways to approach doing this. The first is, if you want to add an entire pressure network to a profile view, you'll probably want to do it this way. You'll go to the Modify tab of the ribbon, expand Design, and then Pressure Pipe Network. And on the ribbon that pops up, you can…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.