From the course: AutoCAD Civil 3D 2018 Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Corridor targeting - AutoCAD Civil 3D Tutorial
From the course: AutoCAD Civil 3D 2018 Essential Training
Corridor targeting
- [Instructor] In our last exercise, we created a very simple corridor. But we also were introduced to targeting as we were able to take our sub-assembly for daylighting and tying it in, or having it target a specific surface. Let's take another look at targeting from a different perspective. Let's go open up our exercise file, 08_05_CorrTargets. And what we're going to do is not target a surface in this case, but we're going to target a horizontal element. I notice here that we have drawn in our drawing a little bit of a drop-off or additional lane as you can see. So we have a taper at the beginning here. And we have a taper at the end. The alignment is heading from the left to the right. And so that was drawn in with AutoCAD. We see the edge of our travel way here, in the curb lines, drawn in with just regular AutoCAD lines. And what we're going to do is we're going to take advantage of that and we're going to stretch our lane sub-assembly to follow that path. To do that, we're…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
-
(Locked)
What is a Civil 3D corridor?2m 47s
-
(Locked)
Assemblies, subassemblies, links, points, and shapes3m 59s
-
(Locked)
Creating an assembly17m 8s
-
(Locked)
Creating a simple corridor4m 51s
-
(Locked)
Corridor targeting5m 21s
-
(Locked)
Corridor surfaces5m 52s
-
(Locked)
Creating an advanced corridor: Cul-de-sac11m 27s
-
(Locked)
Intersection objects12m 23s
-
(Locked)
Bringing it all together5m 55s
-
(Locked)
-
-
-
-
-
-
-
-