Join Aaron F. Ross for an in-depth discussion in this video Photometric lighting, part of 3ds Max 2017: Advanced Lighting.
- [Instructor] Let's begin with some core concepts in advanced lighting starting with photometrics. In 3ds Max, advanced lighting is almost always dealt with in a physically accurate manner. Photometric lighting simulates light intensity in the real world. It can be measured in various ways. Usually for standard lighting instruments it will be measured in lumens. 3ds Max standard lights are an entirely different animal. They are from a previous generation CG rendering algorithm.
Standard lights do not operate in any kind of real world units and the intensity is merely arbitrary. In the real world, light intensity must diminish over distance. A light has to fade out eventually. And photometric lights behave like point lights in the real world that radiate in all directions equally. And that is according to something called the inverse-square law. The intensity is proportional to one divided by the square of the distance.
Here's a table to show the values at different distances. At a distance of one unit, let's say our intensity is one. At twice that distance, our intensity is now 1/4. And at five times the distance, the intensity is 1/25. And at 10 times the distance, we have 1/100 the intensity. So that's a very quick fall-off, also known as a quadratic decay. Here's an illustration.
We've got a light source over there on the left and it's a standard light that has no decay. Each one of the spheres is illuminated the same amount. There are no shadows in this illustration and that's intentional. I turned them off so that I could place all of the spheres in a perfect line making it very clear that they are all evenly spaced. And now here's an illustration in which we have quadratic decay with no gamma correction. And that means the intensity on the first sphere is one.
The intensity on the second sphere is only 1/4. And the intensity on the third is 1/9. And we really can't see much after that. The light has faded out so quickly because of that quadratic decay. In a photometric lighting scheme, the realism of your shot really depends upon accurate measurement in the scene. And your 3ds Max scenes really should be built at a 1:1 scale, or unity scale. If you have to build a miniature scene, then that means you need to adjust your light intensities accordingly.
A miniature scene will require much lower light conditions. We can calculate the needed intensity for our lights in a miniature scene using the inverse-square law. And here's a table, once again, of some common scene scales that you might encounter. If you have a scene built at half-scale, then your lights will need to be reduced to 1/4 of their previous value. At a 1/10 scale model, you'll need to set your light intensities at 1/100.
And at a 1/100 scale model, you'll need to set light intensities to 1/10,000 of the original value. These guidelines really need to be followed for realism because if you have built your scene at an arbitrary scale, then you have no way of knowing how far light is actually going to travel in that scene and you may get scenes that are too washed out because they're built too small or maybe too dark and contrasted because the scene is built too large.
- Photometric lighting and gamma correction
- High dynamic range and exposure control
- Global illumination
- Exterior daylight
- Image-based lighting
- Atmospheric effects
- Geometric backdrops and self-illumination
- Hiding the background for compositing
- Interior daylight
- Studio soft lighting
- Importing photometric data
- Light and shadow exclusion
- Mapping light with Projector Map
- Lens Effects