…For some designs, you'll want a perfectly flat bottom, or you…might want to cut your design into one or more pieces.…In this video, we're going to use the cutting tools.…Click into a front view.…Now let's take a look at the coordinate icon in the lower left hand corner.…In our view, z is up, x runs left to right, and y is going back in space.…Go over to the Cuts panel…on the right hand side.…We want to cut a slice off the bottom, so let's try moving the z slider up.…You see this blue line?…This is a visualization of where we're going to cut the model.…
And if you orbit around a little bit, you…can see what it looks like on the other side.…So it's okay just to roughly place this at first.…We're going to go in and we're going to hit Execute Cut.…And now we have the opportunity…to fine tune this a little bit more.…I'm going to change this value to 0.1 mm, so we can move in small increments.…And then I'm just going to move this around until it's right in the right spot.…And so I'm just trying to cut off sort of these curvy pixels here.…
- What is 3D printing?
- What can you make with a 3D printer?
- Understanding the different 3D printing technologies
- Designing with 3D modeling and scanning
- Creating watertight 3D designs
- Repairing a 3D file
- Exporting your file
Skill Level Intermediate
Maya: 3D Printing with Shapewayswith Ryan Kittleson1h 45m Intermediate
SketchUp 2013 Essential Trainingwith George Maestri2h 16m Beginner
1. Discovering 3D Printing
2. Introducing 3D Printing Technology
3. Creating Your First Design
4. Repairing a 3D Design
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.