…Stereolithography, abbreviated SLA, was the first 3D printing technology.…And it's still a common way to produce high quality prints.…Stereolithography starts with a vat of liquid resin.…A laser traces a path on the surface of the…resin, curing a section that will become the 3D print.…The print raises or lowers depending on the model, in tiny increments.…Curing layer after layer until the print is complete.…Another related technology is called DLP, or Digital Light Processing.…
These printers use projected light instead of a laser to cure liquid resin.…Stereolithography printers are found in both high-end commercial settings, as well…as in smaller desktop machines that cost a few thousand dollars.…This is a stereo lithography print.…This is what it look like directly from the printer.…Let's talk about some of the specifics of SLA.…Objects are often oriented at 45 degrees during the printing process.…And while the vat of resin support overhanging geometry to a degree.…Support struts are often added to assure that all…
- What is 3D printing?
- What can you make with a 3D printer?
- Understanding the different 3D printing technologies
- Designing with 3D modeling and scanning
- Creating watertight 3D designs
- Repairing a 3D file
- Exporting your file
Skill Level Intermediate
Maya: 3D Printing with Shapewayswith Ryan Kittleson1h 45m Intermediate
1. Discovering 3D Printing
2. Introducing 3D Printing Technology
3. Creating Your First Design
4. Repairing a 3D Design
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.