Join Kacie Hultgren for an in-depth discussion in this video Leveling the platform with the Replicator 5th Generation, part of Learning to use MakerBot 3D Printers.
…Now, we need to make sure that are build platform is level.…First, let's talk about when we might want to level our build plate.…You don't need to do it before every print, or even every day.…I like to level my build plate for a few reasons.…So, first off, whenever I replace the tape.…Also, whenever I move the printer, whether it's…from one room to another, or I've had it…with me during an event, I also level…the build platform, when I've had a failed print.…A lot of prints are caused by improper…leveling, and it's always a good time to check.…
Whenever I'm printing a large, full platform print, or a…particularly complicated print, that's a good time to do it too.…And lastly, whenever I've taken a break from my printer…for awhile, I'll level the platform before I get started again.…Having a level build platform, is really crucial for 3D printing.…For the 3D print to properly stick to the platform, the bed needs to be level.…And, the extruder nozzle, has to be the right distance from the plate.…The assistive leveling script, and the sensor…
Author
Released
5/27/2014Want more? Check out Up and Running with 3D Printing for information on creating your own 3D designs to print and other 3D printing technology on the market.
Skill Level Intermediate
Duration
Views
Related Courses
-
Maya: 3D Printing with Shapeways
with Ryan Kittleson1h 45m Intermediate -
Learning Revit
with Paul F. Aubin3h 58m Beginner -
Learning 3D Printing
with Kacie Hultgren1h 16m Intermediate
-
Introduction
-
Welcome1m 5s
-
-
1. Introducing 3D Printing with MakerBot
-
2. Getting Set Up with the Replicator 2 and 2X
-
3. Getting Set Up with the Replicator 5th Generation
-
4. Preparing a 3D Model
-
Orienting a design3m 1s
-
Printing via external media2m 42s
-
Removing a print1m 23s
-
5. Slicing in Depth
-
Structure of a 3D print2m 29s
-
When to use a raft2m 25s
-
Support material1m 37s
-
Exploring resolution3m 3s
-
Choosing shells and infill1m 57s
-
Exploring speed1m 43s
-
-
6. Troubleshooting Problems
-
Fixing leveling issues2m 28s
-
Fixing scale issues1m 30s
-
Fixing incorrect geometry1m 14s
-
Conclusion
-
Next steps23s
-
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.
CancelTake notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.
Share this video
Embed this video
Video: Leveling the platform with the Replicator 5th Generation