…So far, we've talked about printing processes…where the color comes from the material.…You can print in red plastic on a plastic filament printer.…Or mix black and white polymers in a material jetting printer to print gray.…But what if you want to print in full color?…The full color process uses gypsum powder, which is…a white mineral that's also used to create plaster.…The 3D printer…spreads the gypsum in thin layers.…The printer uses an inkjet cartridge to deposit liquid binder,…essentially glue, onto the surface binding the powder layers together.…
The uncolored models are an off-white color, but the printer…can also deposit ink at the same time using CMYK inks.…Cyan, magenta, yellow, and black. Just like an inkjet printer.…The color on a model like this doesn't run all the way through.…It's only printed a couple millimeters deep on the surface.…The gypsum based models have a beautiful…color, but sometimes a somewhat rough finish.…There's some variation on the materials that…are available, depending on the powder that's used.…
- What is 3D printing?
- What can you make with a 3D printer?
- Understanding the different 3D printing technologies
- Designing with 3D modeling and scanning
- Creating watertight 3D designs
- Repairing a 3D file
- Exporting your file
Skill Level Intermediate
Maya: 3D Printing with Shapewayswith Ryan Kittleson1h 45m Intermediate
1. Discovering 3D Printing
2. Introducing 3D Printing Technology
3. Creating Your First Design
4. Repairing a 3D Design
- Mark as unwatched
- Mark all as unwatched
Are you sure you want to mark all the videos in this course as unwatched?
This will not affect your course history, your reports, or your certificates of completion for this course.Cancel
Take notes with your new membership!
Type in the entry box, then click Enter to save your note.
1:30Press on any video thumbnail to jump immediately to the timecode shown.
Notes are saved with you account but can also be exported as plain text, MS Word, PDF, Google Doc, or Evernote.