From the course: Learning to use MakerBot 3D Printers

Unlock the full course today

Join today to access over 22,400 courses taught by industry experts or purchase this course individually.

Fixing leveling issues

Fixing leveling issues - Replicator Tutorial

From the course: Learning to use MakerBot 3D Printers

Start my 1-month free trial

Fixing leveling issues

So, you have a problem. You print isn't sticking to the platform. If it's not sticking, there's probably an issue with your build plate leveling, or your surface preparation. So, first. Make sure your build surface is clean. Clean the blue tape, or the acrylic plate, with alcohol. Or cling kapton tape with acetone. You might also want to review the earlier videos, on leveling. Your platform needs to be both level, and the nozzle needs to be the right distance away. So, first, some notes about the fifth generation machines. The leveling process is really improved on these printers. But if you're having some trouble, you can make sure that the tape is clean, especially in the areas where the nozzle is checking the offset. Your filament should be unloaded, and the nozzle should be clear of any plastic drips. Also make sure that the nozzle is moving freely on the smart extruder. If you have an older generation machine, troubleshooting is a little more challenging. I'm going to show you an…

Contents