Easy-to-follow video tutorials help you learn software, creative, and business skills.Become a member

Selecting a start frame

From: mocha 2.6 Essential Training

Video: Selecting a start frame

Selecting the right start frame for a shape is very important. You want to start on the most complex frame to minimize the need to insert new control points later. This also means you'll have different start frames for different parts of the body. Take a look at this hand here. If we scrub through the shot, you can see the outline of this hand is rather simple here, let's zoom in a little bit. As we scrub through the shot, the fingers open up, presenting a more complicated outline.

Selecting a start frame

Selecting the right start frame for a shape is very important. You want to start on the most complex frame to minimize the need to insert new control points later. This also means you'll have different start frames for different parts of the body. Take a look at this hand here. If we scrub through the shot, you can see the outline of this hand is rather simple here, let's zoom in a little bit. As we scrub through the shot, the fingers open up, presenting a more complicated outline.

We will keep going, and out forms a fist, so the outline here would be simpler and to the end of the shot. Okay, so somewhere right around here where the fingers are spread out the white as would represent the most complicated outline and that would be where we would want to start rotoing the hand. Let's take another example. Let's take a look at the torso here. So I will scrub through the shot and ah! Look at here, right around here. look at all of the folds in the cloth here. So this frame might represent the most complicated outline because the outline of the torso might go like up here, up to there, over the shoulders and down the side and then they overlap here in the front, we don't care about.

So that would be the most complicated outline and we would scrub through the rest of the shot. See how much simpler this edge is here and continuing on through the shot. Okay, so we will call that the most complicated outline and that will be where we would start torso. Let's take one last case, this is the one we'll actually work on which is the head. Okay, we have a pretty simple outline here on the face, as we scrub forward, the head turns which happens all the time and now we have all of this complex curved surface here.

lips, nose, mouth, eye indent. So the most complicated frame for the head would be somewhere in this neighborhood. So I've already drawn a shape. So, we will turn that on and select the keyframes, there we are and we'll jump to this keyframe here. To keep things organized for you, the head.mocha file in the Project Media folder only have the head roto. Turn the Mattes off. So this would represent then our start frame for the head.

The reason that we want to start with the most complicated outline is we really like to avoid inserting new control points over the length of the shot. This introduces some problems. We'll see later what those problems are. We also always want to have the fewest possible control points on any spline, the reason is to avoid jitter, once you get jitter introduced it becomes very hard to fix. pushing in here a little bit. If the camera were closer, we might actually break this head into several separate shapes, one for the ear, the nose, forehead, the lips and the chin, so we might have four, five shapes.

But since the camera is this far away, we can get by with just this one shape. So I will select the shape again and I have a keyframe here on 43. So I am going to set the out points here to 43 and I will set the in point to frame 12. This will be the range I will be working with. I will pan the viewer with the X key and zoom in with the Z key and now we'll take a look at our new keyframe up here, right here on frame 12, you see how much simpler the outline is here.

So let's place the keyframe here and see how we might do that. Select that, select all the control points, Q key for a Translate tool, move it up here. Okay, now we'll reposition, zoom in a little closer. Sometimes it's very helpful to turn off the tangents right here, this button. That way, you can just move the control points without worrying about all those little tangent lines being in our face, and we get these scooched in here and bring that in there.

On this keyframe, the other side of the head has become more complicated, so we'll deal with that in a minute. But this is the thing I wanted to show you. After repositioning all of these control points, fine-tune that, however I've ignored the tangents, right? Now, the problem is, see how lumpy the curve is? Well, we can fix that very easily by selecting all those points, doing a right-mouse pop up point smooth and now all the tangents will be made parallel, I will turn the Tangents back on.

See how nice they are. All right, I can refine that a little bit, move the points in here, in there, and get a nice, smooth edge and once again select these points, right-mouse pop up and say Smooth and all the tangents will become smoothed up. Okay, so let's say we're happy with that. Now we need to take a look at this part of the problem where we've actually got increased complexity.

I will turn on my Spline and once again I am going to turn the Tangents off. I will switch to the Insert Control Point tool by typing I on the keyboard and now I get the insert cursor. So now I am going to sit here and insert a bunch of control points, trying not to move the old ones anymore than I have to. You notice there are some wrinkly anomalies, don't worry about that. We'll deal with that in just a moment. Okay. All right, let's say we're happy with that.

This is the problem you get when you insert control points because these control points have been inserted between old control points that already had their slopes set, see the tangents. So rather than coming in here and individually trying to adjust each and every one of these, again we're going to use that smoothing feature. So I am going to select all these points here. Maybe I want to get a couple of more by holding the Ctrl or Command key. Now that I have the effect control point sampled, I am going to pick any one control point, right-mouse pop up, Point > Smooth and then all the tangents now line up.

We'll deselect and take a look at our shot, move back out a little bit. Okay, so let's say we're happy with that. Actually, we're not, we have a few little issues that we need to deal with but I don't want to spend all day twiddling control points in front of you. That's not fun, so I am going to actually smooth these a little bit here and let's pretend this is good. Okay, all right! We've inserted new control points on frame 12. But that's caused problem back on the previous keyframe, let's go and see what happens.

I will select the spline, scrub the playhead back to my first keyframe, okay we were good before but now we have new kinks and wrinkles, look at this. See that? Here's a good one, oh, here's a bad one. The reason is, as before, we've inserted keyframes between points that already have their tension handles adjusted like this one here, okay? So what we need to do is relax all those tensions exactly like we did before.

So I will just select a whole bunch of points, use Command and Ctrl maybe to add one or two more that we want, maybe subtract one or two that we don't want, and then right-mouse pop up Point > Smooth and that will relax all the tensions on all the control handles getting rid of all of the kinks. Let me pull out here a little bit. Now, let's do a mid keyframe. I am going to select this guy here and scrub here to around frame 27. So we've got two extremes, one over here at 12, one over here at 47 and here's an in-between frame.

So I am going to pick up my Translate tool, move the spline over and by golly it's done a pretty darn good job at making an in-between frame for me. Let's deselect, scoot in, we'll refine some control points. Again, keeping the control point twiddling to a minimum, right? Actually that's not bad at all. Maybe we would like to smooth out some of this hair, Point > Smooth, okay, All right.

So let's say we like that. The point I want to make here is what we call temporal coherency, keeping control points associated with a body part over time. That's the temporal part. The coherent part is staying in the same place. I will give you an example. I will select the nose, I am going to turn off the tangents and I am going to select this control point for the nose, I will zoom out a little bit. If I come over here to this keyframe, you could see that control point is on the nose as it is here, and when we go to the keyframe on 12, it's sort of just melted into the side of the head.

So the important point is that control point wants to always stay associated with the nose. Let's take another case, there's the chin. Watch this control point, stay associated with the chin all the way through the entire timeline and that's temporal coherency. This is an extremely important part of good rotoscoping. If the control points slip and slide around the spline, they're going to introduce chatter. And again, once you've got chatter in, it is very hard to fix.

Okay, we'll deselect this, rehome the viewer and close by saying, even though you have carefully planned the shapes animation, sometimes after you get into it, you discover you've made a wrong choice. Don't be afraid to delete and start over when needed. The final result will be better and quicker rather than struggling to fix the bad start.

Show transcript

This video is part of

Image for mocha 2.6 Essential Training
mocha 2.6 Essential Training

49 video lessons · 7786 viewers

Steve Wright
Author

 
Expand all | Collapse all
  1. 5m 23s
    1. Welcome
      1m 40s
    2. Getting to know the user interface
      3m 43s
  2. 1h 7m
    1. Drawing X-splines
      8m 2s
    2. Drawing B-splines
      5m 4s
    3. Editing splines
      3m 52s
    4. Keyframing splines
      6m 33s
    5. Discovering the timeline controls
      5m 52s
    6. Walking through the New Project window
      4m 23s
    7. Working with interlaced clips
      8m 19s
    8. Setting the color space
      4m 46s
    9. Defining mocha preferences
      3m 46s
    10. Walking through the Layer Control panel
      3m 22s
    11. Walking through the Layer Properties panel
      3m 29s
    12. Viewing mattes
      3m 41s
    13. Walking through the Edge Properties panel
      6m 24s
  3. 1h 8m
    1. A planar tracking demo
      6m 36s
    2. Setting motion options
      13m 12s
    3. Adjusting the tracking spline
      8m 51s
    4. Tracking awkward surfaces
      6m 3s
    5. Understanding the planar grid
      6m 50s
    6. Dealing with lens distortion
      7m 43s
    7. An AdjustTrack demo
      5m 49s
    8. Keyframing the AdjustTrack
      7m 48s
    9. Offsetting reference points
      5m 49s
  4. 1h 8m
    1. Strategizing shape distribution
      11m 21s
    2. Working with large areas
      2m 44s
    3. Selecting a start frame
      10m 38s
    4. Replacing a shape
      2m 54s
    5. Keyframing: Bifurcation
      4m 38s
    6. Keyframing: Straight ahead
      5m 17s
    7. Keyframing: Extremes
      9m 22s
    8. Keyframing: Maximum digression
      6m 45s
    9. Converting to stereo
      2m 54s
    10. Inspecting your rotos
      4m 43s
    11. Rendering mattes
      4m 45s
    12. Exporting shapes
      2m 54s
  5. 1h 30m
    1. Moving the camera with parallax
      5m 30s
    2. Moving the camera without parallax
      3m 58s
    3. Using multiple splines in a layer
      7m 23s
    4. Subtracting shapes
      7m 6s
    5. Stabilizing the viewer
      5m 46s
    6. Keyframing during tracking
      7m 24s
    7. Unlinking the tracker
      5m 8s
    8. Tracking manually
      12m 35s
    9. Defining corner pinning
      5m 4s
    10. Going further into the Track tab
      6m 53s
    11. Utilizing the more advanced AdjustTrack features
      8m 40s
    12. Working with the Stabilize tab
      6m 11s
    13. Exporting track data
      8m 53s

Start learning today

Get unlimited access to all courses for just $25/month.

Become a member
Sometimes @lynda teaches me how to use a program and sometimes Lynda.com changes my life forever. @JosefShutter
@lynda lynda.com is an absolute life saver when it comes to learning todays software. Definitely recommend it! #higherlearning @Michael_Caraway
@lynda The best thing online! Your database of courses is great! To the mark and very helpful. Thanks! @ru22more
Got to create something yesterday I never thought I could do. #thanks @lynda @Ngventurella
I really do love @lynda as a learning platform. Never stop learning and developing, it’s probably our greatest gift as a species! @soundslikedavid
@lynda just subscribed to lynda.com all I can say its brilliant join now trust me @ButchSamurai
@lynda is an awesome resource. The membership is priceless if you take advantage of it. @diabetic_techie
One of the best decision I made this year. Buy a 1yr subscription to @lynda @cybercaptive
guys lynda.com (@lynda) is the best. So far I’ve learned Java, principles of OO programming, and now learning about MS project @lucasmitchell
Signed back up to @lynda dot com. I’ve missed it!! Proper geeking out right now! #timetolearn #geek @JayGodbold
Share a link to this course

What are exercise files?

Exercise files are the same files the author uses in the course. Save time by downloading the author's files instead of setting up your own files, and learn by following along with the instructor.

Can I take this course without the exercise files?

Yes! If you decide you would like the exercise files later, you can upgrade to a premium account any time.

Become a member Download sample files See plans and pricing

Please wait... please wait ...
Upgrade to get access to exercise files.

Exercise files video

How to use exercise files.

Learn by watching, listening, and doing, Exercise files are the same files the author uses in the course, so you can download them and follow along Premium memberships include access to all exercise files in the library.


Exercise files

Exercise files video

How to use exercise files.

For additional information on downloading and using exercise files, watch our instructional video or read the instructions in the FAQ .

This course includes free exercise files, so you can practice while you watch the course. To access all the exercise files in our library, become a Premium Member.

Join now Already a member? Log in

Are you sure you want to mark all the videos in this course as unwatched?

This will not affect your course history, your reports, or your certificates of completion for this course.


Mark all as unwatched Cancel

Congratulations

You have completed mocha 2.6 Essential Training.

Return to your organization's learning portal to continue training, or close this page.


OK
Become a member to add this course to a playlist

Join today and get unlimited access to the entire library of video courses—and create as many playlists as you like.

Get started

Already a member ?

Become a member to like this course.

Join today and get unlimited access to the entire library of video courses.

Get started

Already a member?

Exercise files

Learn by watching, listening, and doing! Exercise files are the same files the author uses in the course, so you can download them and follow along. Exercise files are available with all Premium memberships. Learn more

Get started

Already a Premium member?

Exercise files video

How to use exercise files.

Ask a question

Thanks for contacting us.
You’ll hear from our Customer Service team within 24 hours.

Please enter the text shown below:

The classic layout automatically defaults to the latest Flash Player.

To choose a different player, hold the cursor over your name at the top right of any lynda.com page and choose Site preferences from the dropdown menu.

Continue to classic layout Stay on new layout
Exercise files

Access exercise files from a button right under the course name.

Mark videos as unwatched

Remove icons showing you already watched videos if you want to start over.

Control your viewing experience

Make the video wide, narrow, full-screen, or pop the player out of the page into its own window.

Interactive transcripts

Click on text in the transcript to jump to that spot in the video. As the video plays, the relevant spot in the transcript will be highlighted.

Are you sure you want to delete this note?

No

Your file was successfully uploaded.

Thanks for signing up.

We’ll send you a confirmation email shortly.


Sign up and receive emails about lynda.com and our online training library:

Here’s our privacy policy with more details about how we handle your information.

Keep up with news, tips, and latest courses with emails from lynda.com.

Sign up and receive emails about lynda.com and our online training library:

Here’s our privacy policy with more details about how we handle your information.

   
submit Lightbox submit clicked
Terms and conditions of use

We've updated our terms and conditions (now called terms of service).Go
Review and accept our updated terms of service.