Easy-to-follow video tutorials help you learn software, creative, and business skills.Become a member
Now let's do it together this time with the building tilt-up clip, so you get some hand-on experience and we'll add some more information about the adjust track feature. First we'll just draw ourselves a little tracking spine here and don't forget to set the Motion to Translation only, so we get this much drift as we can to work with and we'll track it forward. Mocha's Planar Tracker is so dazzlingly good that even by tying one hand behind its back like this we still get some remarkably stable tracking data, but this will give us a little drift to play with.
Okay tracking is done. So let's first let's rename our spline, so we call this guy Tracker and we'll turn tracking cogs, so we don't accidentally track it again later. With the Tracking Spline selected, we can now turn on the Stabilize future. And when you play the clip it'll keep that tracking spline lock to the centre of the frame very nice. We'll stop let's zoom in to get a closer look, so we can set planar surface again make sure your playhead is on Frame 1.
Normally you can set the planer surface on any frame number you want, but this time since we want to do the adjust track, we want to set it to be spot on Frame 1 so that we can correct the drift over the length of the clip. All right, so we'll turn on the planar surface and once again, we'll line that up very carefully. So we have placed it on a target that's very easy to see that it's on or off, okay, down here at the lower right hand point and the lower left hand point, there.
Now when I play the clip you can see the drift we have in the corners. Okay so that's we're going to fix with our adjust track, we'll stop that and go to Frame 1 again. The reason we need to be on Frame 1 is this is the frame that we set the planar surface. Theoretically, this is the frame where the planar surface lines up most exactly over the whole like the clip. We want to be on that frame because when we click on the Adjust Track tab the current playhead position becomes the Master Frame.
All of the drift will be corrected relative to this frame. So we want be on the same frame that planar surface is most perfectly lined up on. Again, we see the axis for the Master Frame and if I move the playhead off the axis disappear, so if you are ever looking for the Master Frame just look for the big red axis. Okay, now we're ready to select our reference points and line them up. First of all, I like to show you a couple of different ways to select them as you saw before we can click on them like this, but there's another way down here these little angle brackets.
This is the lower right reference point, the lower left, the upper left and the upper right, you'll see shortly how this can be a much faster way to work. Okay to set a keyframe for our reference points we'll drag the playhead all the way to the end of the clip and you can see in the Current Frame window compared to the Master window, how much we're drifting over the length of the shot, so I'll go to the last frame, I'll select the reference point in the upper left-hand corner it doesn't matter which one.
Now I'm going to show you three different ways to line it up with the Master Frame, watch the Current Frame window as I move the point around, so I want to set this to match the Master Frame exactly okay. Okay I'll select the upper right-hand corner, this time, I'm going to use a different method to position it. Down here where the bracket buttons are for selecting the different points, we also have this auto button. Watch the Current Frame window right here when I click on the Auto button.
When you click the Auto button, it'll automatically shift the current frame to match the Master Frame using feature matching techniques. Okay I'll go down here and select the lower right hand corner and click Auto and then I'll select the lower left hand corner to show you the third method in addition to the dragging and dropping and the Auto button we also have a Nudge feature, you see here the left, up, right and down buttons okay. So I can click on the right and each time I click, I'm going to move it to tenth of the pixel, so I'm going to click Right, Right, Right, Right, Right, Right, Right, Right, Right you see it drifting and I'll select Down, Down, Down, Down, Down, Down to get a match.
So three different ways, drag it, the Auto button and the Nudge feature. Okay, I've select the upper left-hand corner reference point and you can see now the master frame and the current frame line up very nicely. The current frame of course is the end of the clip, but watch what happens as we scrub through the shot. There is some drift. So the ends lined up last frame, first frame, but in the middle, we have some more drift, so I'm going to scrub through this and find the optimal point right there and now I'll set another keyframe for this location.
To do that I'm just going to click the Auto button and bang it's snaps too. Then I'll select the upper right hand corner and see he's off a little bit click Auto and now the lower right, click Auto and now the lower left, click Auto. Okay, now I have three keyframes or rather then master in two keyframe over the length of the shot and you can see in the Current Frame window how beautifully locked on that is, I'll switch back to the Track tab and now when I want to play the clip my planar surface is locked on over the whole length of the shot with no drift at all.
We'll stop that and I will go to frame 1. Now we can draw in a Roto Spline and hook it to the tracker, so I am going to turn off the planar surface, I'll actually hide my tracker, I don't need it any more and I'm going to draw a nice tight roto here on this window very careful, so you can see any drift at all, okay I get this lined up nice and square. Okay, so I drew it on Frame 1 because frame 1 is perfectly locked with a planar surface and its drifts over the length of the clip, and now I'll rename this window roto.
Now all I have to do is link the Window Roto to the tracker. So with Window Roto selected, I come down to link to track pop-up and I'll select Tracker, but I did not check the link to adjust the track. As a result I've linked it to the raw tracking Window Roto is drifting off target okay. So what we need to do to make it use the adjusted track data, we've to be sure and click on the link to adjust a track.
Now watch much better. I set the playhead to the frame 1 and re-home the viewer. The moral of the story here is to be sure to link your rotos to the adjusted track of your tracking splines.
Get unlimited access to all courses for just $25/month.Become a member
107 Video lessons · 33197 Viewers
94 Video lessons · 23034 Viewers
78 Video lessons · 9425 Viewers
147 Video lessons · 3156 Viewers
Access exercise files from a button right under the course name.
Search within course videos and transcripts, and jump right to the results.
Remove icons showing you already watched videos if you want to start over.
Make the video wide, narrow, full-screen, or pop the player out of the page into its own window.
Click on text in the transcript to jump to that spot in the video. As the video plays, the relevant spot in the transcript will be highlighted.
Your file was successfully uploaded.