From the course: AutoCAD 2015 Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Architectural project: Drawing walls
From the course: AutoCAD 2015 Essential Training
Architectural project: Drawing walls
In this video, we will begin drawing the walls from this floor plan sketch. We've already scaled this sketch up, so it's approximately at the right scale. Now, let's go ahead and begin drawing the walls. Click Line. Let's start down here in the lower-left corner. I'll draw a line all the way over here. I don't really know how far that's going to be yet, so I'll just draw it in, approximately like that. I notice down here it says eight inch thick typical. So I can offset this line, eight inches. So I click offset type eight Enter. And then select the red line and click below it to offset that down. And then press Enter. I can pan, we can see that may be a little better. No angles are given here. This looks to me like it's part of an octagon. So let's draw in an octagon with a four foot edge. And we'll put that in there. I'm going to pan over to the side a little bit, and use the polygon tool. The number of sides is eight. I don't know where the center would be, but I can use the edge…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
-
-
Engineering project: Part drawing7m 37s
-
(Locked)
Architectural project: Attaching a sketch4m 44s
-
(Locked)
Architectural project: Drawing walls8m 52s
-
(Locked)
Architectural project: Cutting openings8m 4s
-
(Locked)
Architectural project: Drawing doors6m 54s
-
(Locked)
Architectural project: Adding details8m 41s
-
-
-
-
-
-
-
-
-
-
-