Easy-to-follow video tutorials help you learn software, creative, and business skills.Become a member

Slideshows and bit budgeting

From: Encore CS4 Essential Training

Video: Slideshows and bit budgeting

In this brief movie, we're going to take a look at the technical aspects of the slideshow as basically how much space it takes up on your DVD. And it's kind of interesting with slideshows because it completely depends. If you just have a simple, straight slideshow, no transition, no effects, then the effects on bit budgeting is negligible. Basically photos, the photos in the slideshow take a very little room on a DVD. So if you have a full length high- quality movie and you want to smush a slideshow in there, it's not really going to take that much effort if you don't have any effects or transitions.

Slideshows and bit budgeting

In this brief movie, we're going to take a look at the technical aspects of the slideshow as basically how much space it takes up on your DVD. And it's kind of interesting with slideshows because it completely depends. If you just have a simple, straight slideshow, no transition, no effects, then the effects on bit budgeting is negligible. Basically photos, the photos in the slideshow take a very little room on a DVD. So if you have a full length high- quality movie and you want to smush a slideshow in there, it's not really going to take that much effort if you don't have any effects or transitions.

However, if you have transitions between clips, so you had a cross dissolve or something like that going from this clip to this clip, basically what that's going to do is it's going to force Encore to have to render a movie between these two and that will start adding to your file size a little bit. Let's say for example this image was on for 5 seconds and then had 2 second transition to this movie, which was on for another 5 seconds. Basically the 2 second transition between them would have to be rendered as a movie, but the other 5 seconds of these two slides going to remain as really low file size images. However, if you add Random Pan and Zoom to your slideshow, it will essentially as far as bit budgeting goes, turn it into a movie.

So if you have a slideshow that's 10 minutes long and you add Random Pan and Zoom to it, it's basically going to be like you're adding a 10 minute movie into your DVD. So make sure when you're planning out your DVDs, you also realize what kind of slideshow you are going to have with your DVD. So again, just a recap, regular slideshows without any effects or transitions, it's basically treated like a series of images, very, very small file size. Add transitions and basically it's a same thing except that where the transitions are Encore will have to make movies and that will start adding to your file size a little bit. And again, if you have Random Pan and Zoom selected, it's going to turn the entire slideshow into a video.

So realize these sort of details and plan your DVDs accordingly.

Show transcript

This video is part of

Image for Encore CS4 Essential Training
Encore CS4 Essential Training

143 video lessons · 15160 viewers

Chad Perkins
Author

 
Expand all | Collapse all
  1. 3m 47s
    1. Welcome
      1m 19s
    2. Is there a trial version of Encore?
      54s
    3. Using the example files
      1m 34s
  2. 18m 57s
    1. Using this chapter
      41s
    2. Using content included with Encore
      3m 19s
    3. Adding a menu to a project
      2m 51s
    4. Importing assets
      3m 8s
    5. Understanding timelines
      2m 19s
    6. Creating links and navigation
      4m 5s
    7. Introduction to exporting
      2m 34s
  3. 23m 9s
    1. Understanding disc formats
      1m 46s
    2. About television standards
      1m 56s
    3. What is transcoding?
      2m 56s
    4. Exporting video for Encore
      3m 18s
    5. About compression
      3m 10s
    6. Bits vs. bytes
      1m 50s
    7. The importance of bit budgeting
      2m 46s
    8. About pixel aspect ratios
      3m 21s
    9. About overscan and safe areas
      2m 6s
  4. 28m 13s
    1. Knowing your audience
      1m 6s
    2. Creating a new project
      3m 50s
    3. A quick look at the interface
      4m 42s
    4. Rules for importing
      2m 47s
    5. Importing assets as Encore objects
      1m 22s
    6. Previewing assets in the Project panel
      2m 3s
    7. Organizing the Project panel
      2m 24s
    8. Using the Properties panel
      2m 48s
    9. Getting familiar with the Library panel
      5m 39s
    10. Using the Resource Central panel
      1m 32s
  5. 21m 26s
    1. Understanding menus
      3m 51s
    2. Creating a menu
      4m 48s
    3. Editing menus
      4m 31s
    4. The Menu Viewer vs. the Menu panel
      2m 27s
    5. Creating motion menus
      3m 43s
    6. About submenus
      2m 6s
  6. 24m 40s
    1. The anatomy of a button
      5m 8s
    2. Using the black and white arrows with buttons
      1m 39s
    3. Viewing and adjusting button routing
      4m 20s
    4. Using buttons with video preview
      3m 4s
    5. What is a subpicture?
      2m 15s
    6. About subpicture states
      2m 2s
    7. Changing subpicture colors
      4m 14s
    8. Creating subpictures from text
      1m 58s
  7. 18m 14s
    1. What is a timeline?
      2m 19s
    2. Using the Monitor
      3m 19s
    3. Creating chapter markers
      1m 51s
    4. Setting poster frames
      2m 16s
    5. Creating chapter points automatically
      1m 38s
    6. Editing video in the timeline
      3m 38s
    7. The Timeline Viewer vs. the Timeline panel
      1m 33s
    8. Exporting a frame as a file
      1m 40s
  8. 18m 53s
    1. Creating navigation with the Properties panel
      2m 53s
    2. Linking chapter markers to submenu buttons
      2m 1s
    3. Setting a "first play" object
      1m 25s
    4. About end actions
      1m 51s
    5. Creating navigation with the Flowchart
      2m 42s
    6. Using some new Flowchart tricks
      1m 1s
    7. Auto-selecting button names from links
      1m 54s
    8. Creating user permissions for a disc
      2m 1s
    9. Creating user permissions for a menu
      1m 6s
    10. Creating user permissions for a timeline
      1m 59s
  9. 18m 45s
    1. Creating and using guides
      1m 41s
    2. Creating and adjusting text
      5m 12s
    3. Adding drop shadows to text and other objects
      3m 28s
    4. Adding styles to text and other objects
      2m 46s
    5. Automatically arranging objects
      1m 38s
    6. Transforming objects
      4m 0s
  10. 22m 44s
    1. Using audio in Encore
      2m 15s
    2. Understanding 5.1 surround sound
      1m 32s
    3. Adding audio while a menu plays
      1m 27s
    4. Allowing users to change the disc language
      6m 27s
    5. Creating subtitle tracks
      3m 1s
    6. Using imported subtitles
      2m 45s
    7. Exporting subtitles as a text file
      49s
    8. Creating subtitles with multiple colors
      4m 28s
  11. 18m 2s
    1. Introducing slideshows
      2m 50s
    2. Adjusting slideshow properties
      5m 2s
    3. Adding transitions to slides
      3m 13s
    4. Adding motion to slides
      3m 14s
    5. Syncing slideshows to audio
      1m 41s
    6. Slideshows and bit budgeting
      2m 2s
  12. 7m 25s
    1. What is a playlist?
      5m 26s
    2. Using chapter playlists
      1m 59s
  13. 18m 31s
    1. The power of end-action overrides
      3m 51s
    2. Using replacement layers
      2m 57s
    3. Looping menus
      3m 2s
    4. Replacing a menu
      1m 37s
    5. Creating a chapter index
      2m 16s
    6. Using photos and video as subpictures
      4m 48s
  14. 20m 54s
    1. Creating "Easter eggs"
      5m 15s
    2. Making games
      3m 3s
    3. Using menu transitions
      6m 7s
    4. Using subpictures as art
      3m 40s
    5. Creating a video menu
      2m 49s
  15. 9m 4s
    1. Why use Encore as a presentation tool?
      3m 25s
    2. Using subtitles with slideshows
      2m 12s
    3. Creating slideshows with manual advance
      2m 0s
    4. Adding data content to discs
      1m 27s
  16. 21m 41s
    1. About this chapter
      1m 23s
    2. Introduction to the Photoshop layer codes
      1m 19s
    3. The button set codes
      4m 11s
    4. The subpicture highlight codes
      5m 36s
    5. The replacement layer code
      3m 15s
    6. The video button code
      2m 43s
    7. The submenu navigation codes
      1m 36s
    8. Using pre-built menus as templates
      1m 38s
  17. 13m 46s
    1. About Flash and Encore
      1m 58s
    2. Creating buttons that link to websites
      1m 5s
    3. Exporting a SWF file
      2m 44s
    4. Changing the SWF output size
      1m 41s
    5. Using HTML templates as backgrounds
      52s
    6. Importing other HTML templates
      43s
    7. Using FLV vs. F4V video
      1m 48s
    8. Checking a Flash project for errors
      1m 19s
    9. Creating a SWF file with streaming video
      1m 36s
  18. 19m 38s
    1. Using Adobe Bridge to browse for assets
      4m 36s
    2. Importing sequences from Premiere Pro via Dynamic Link
      2m 54s
    3. Updating markers from Dynamic Link video
      1m 39s
    4. Using Speech Search in Premiere to help create subtitles
      2m 38s
    5. Creating motion menus in After Effects
      4m 20s
    6. Making buttons and subpictures in After Effects
      3m 31s
  19. 9m 46s
    1. What are Blu-ray discs?
      2m 2s
    2. Setting up Blu-ray projects
      1m 28s
    3. About the Blu-ray codecs
      1m 58s
    4. Creating Blu-ray popup menus
      2m 36s
    5. Previewing pop-up menus over a timeline
      1m 42s
  20. 19m 59s
    1. Encore's Automatic Letterbox
      2m 17s
    2. Previewing your disc
      1m 44s
    3. Rendering for previews
      1m 53s
    4. Checking your project for errors
      3m 27s
    5. Fixing broken projects using the cache
      2m 10s
    6. About copy protection
      1m 43s
    7. About region encoding
      1m 37s
    8. About output options
      2m 16s
    9. Duplication vs. replication
      1m 18s
    10. Fixing the audio_TS problem
      1m 34s
  21. 20m 54s
    1. Setting up a project
      1m 18s
    2. Creating a menu in Photoshop
      8m 2s
    3. Importing and organizing content
      3m 13s
    4. Creating a slideshow
      2m 32s
    5. Linking objects
      4m 6s
    6. Testing and exporting a project
      1m 43s
  22. 26s
    1. Goodbye
      26s

Start learning today

Get unlimited access to all courses for just $25/month.

Become a member
Sometimes @lynda teaches me how to use a program and sometimes Lynda.com changes my life forever. @JosefShutter
@lynda lynda.com is an absolute life saver when it comes to learning todays software. Definitely recommend it! #higherlearning @Michael_Caraway
@lynda The best thing online! Your database of courses is great! To the mark and very helpful. Thanks! @ru22more
Got to create something yesterday I never thought I could do. #thanks @lynda @Ngventurella
I really do love @lynda as a learning platform. Never stop learning and developing, it’s probably our greatest gift as a species! @soundslikedavid
@lynda just subscribed to lynda.com all I can say its brilliant join now trust me @ButchSamurai
@lynda is an awesome resource. The membership is priceless if you take advantage of it. @diabetic_techie
One of the best decision I made this year. Buy a 1yr subscription to @lynda @cybercaptive
guys lynda.com (@lynda) is the best. So far I’ve learned Java, principles of OO programming, and now learning about MS project @lucasmitchell
Signed back up to @lynda dot com. I’ve missed it!! Proper geeking out right now! #timetolearn #geek @JayGodbold
Share a link to this course

What are exercise files?

Exercise files are the same files the author uses in the course. Save time by downloading the author's files instead of setting up your own files, and learn by following along with the instructor.

Can I take this course without the exercise files?

Yes! If you decide you would like the exercise files later, you can upgrade to a premium account any time.

Become a member Download sample files See plans and pricing

Please wait... please wait ...
Upgrade to get access to exercise files.

Exercise files video

How to use exercise files.

Learn by watching, listening, and doing, Exercise files are the same files the author uses in the course, so you can download them and follow along Premium memberships include access to all exercise files in the library.


Exercise files

Exercise files video

How to use exercise files.

For additional information on downloading and using exercise files, watch our instructional video or read the instructions in the FAQ.

This course includes free exercise files, so you can practice while you watch the course. To access all the exercise files in our library, become a Premium Member.

Join now "Already a member? Log in

Are you sure you want to mark all the videos in this course as unwatched?

This will not affect your course history, your reports, or your certificates of completion for this course.


Mark all as unwatched Cancel

Congratulations

You have completed Encore CS4 Essential Training.

Return to your organization's learning portal to continue training, or close this page.


OK
Become a member to add this course to a playlist

Join today and get unlimited access to the entire library of video courses—and create as many playlists as you like.

Get started

Already a member?

Become a member to like this course.

Join today and get unlimited access to the entire library of video courses.

Get started

Already a member?

Exercise files

Learn by watching, listening, and doing! Exercise files are the same files the author uses in the course, so you can download them and follow along. Exercise files are available with all Premium memberships. Learn more

Get started

Already a Premium member?

Exercise files video

How to use exercise files.

Ask a question

Thanks for contacting us.
You’ll hear from our Customer Service team within 24 hours.

Please enter the text shown below:

The classic layout automatically defaults to the latest Flash Player.

To choose a different player, hold the cursor over your name at the top right of any lynda.com page and choose Site preferencesfrom the dropdown menu.

Continue to classic layout Stay on new layout
Exercise files

Access exercise files from a button right under the course name.

Mark videos as unwatched

Remove icons showing you already watched videos if you want to start over.

Control your viewing experience

Make the video wide, narrow, full-screen, or pop the player out of the page into its own window.

Interactive transcripts

Click on text in the transcript to jump to that spot in the video. As the video plays, the relevant spot in the transcript will be highlighted.

Are you sure you want to delete this note?

No

Your file was successfully uploaded.

Thanks for signing up.

We’ll send you a confirmation email shortly.


Sign up and receive emails about lynda.com and our online training library:

Here’s our privacy policy with more details about how we handle your information.

Keep up with news, tips, and latest courses with emails from lynda.com.

Sign up and receive emails about lynda.com and our online training library:

Here’s our privacy policy with more details about how we handle your information.

   
submit Lightbox submit clicked
Terms and conditions of use

We've updated our terms and conditions (now called terms of service).Go
Review and accept our updated terms of service.