Start learning with our library of video tutorials taught by experts. Get started
Viewers: in countries Watching now:
Join Jeff Bartels as he covers the most important features of this industry-standard drafting and design application in AutoCAD 2011 Essential Training. This course begins with a tour of AutoCAD's interface and the tools used to create basic shapes. It then focuses on the methods used to modify and refine geometry while emphasizing accuracy and good habits to build a solid design foundation. The course covers using layers, line types, and colors to organize a drawing file and explains how to efficiently annotate a design and prepare it for final output. Throughout the title, Jeff shares industry techniques used in production and reinforces concepts using practical examples. Exercise files are included with the course.
AutoCAD drawings come in all sizes. We can work on everything from a small mechanical part to an entire college canvas. So it's important to know how to navigate your way around inside a file. In this lesson, we're going to learn how to use Pan and Zoom to adjust our view. On my screen, I've got an architectural example. This is a drawing of a floor plan for a single family home. Now, the trick to zooming and panning your drawing involves using the Scroll Wheel on your mouse. As an example, if I roll my Wheel forward, I can zoom in on my drawing. If I roll my Wheel back, I can zoom out.
Notice that my zooming is focused on the location of my Cursor. So if I wanted to zoom in on the Master Bath area, I could place my Cursor over here and roll my Wheel forward to zoom in. We can also use the Scroll Wheel to pan. If I click-and-hold the Wheel down, remember your Scroll Wheel is also a button. I can drag my Cursor and adjust my view on screen. I'm going to release the Wheel, I'll come over here and I'll click-and-hold the Wheel down again, and I'll pan the drawing over and we'll center this car on screen.
Panning your AutoCAD drawing is a lot like panning in Adobe Acrobat document. Now, what if you're working on a Laptop or a Netbook and you're not using a Wheel Mouse? If that's the case, you can use the Pan and Zoom tools over here on the Navigation Bar. Using these icons, we can launch Pan and Zoom and the commands will run using out left mouse button. I'm going to pan the drawing over to the Kitchen area, and then I'm going to zoom in on the island and we'll center this on screen. Notice on the island, we've got an architectural drawing, I'm going to zoom in a little bit closer.
And as you can see, this is a drawing of the same floor plan that we're working in. Let's continue zooming in on this bedroom. I'll get a little bit closer and we'll center this on screen. Notice that even though I've zoomed in a pretty good distance, my geometry doesn't look pixelated, like what you would typically see in a photo editing program. That's because AutoCAD drawings aren't based on pixels, they are based on vectors. AutoCAD is a vector-based application, that means that all the line work that we see is based on mathematical computations. So I can zoom in as much as I want on this drawing and the line work is always going to look great.
That being said, let me back up a little bit. We'll pan over to the Bathroom area. Take a look at this toilet symbol. This guy is supposed to appear round, right now, it's looking a little bit angular. Since AutoCAD is a vector-based program, if we pan and zoom great distances, it can be taxing on the computer processor and video card. So what AutoCAD will do is it will sacrifice the quality of the arcs to allow us to pan and zoom freely on screen. Now, don't worry, this geometry will always plot just fine. However, its appearance may tend to break down from time-to-time.
If you'd like to clean up the appearance of the arcs, you can use the command called the Regen. And I'm afraid Regen is not available on the Ribbon, we have to launch this command from the command Line. So I'm going to click to place my Cursor down here and I'll type regen and hit Enter. And when I do, AutoCAD regenerates the database, it refreshes the geometry and I see a better representation of my line-work. Let's start zooming out. I'm going to roll my Wheel back, continue rolling back. Let's center this drawing on screen, I'll zoom out some more.
Take a look at the lower left corner of my screen. Even though I'm rolling my Wheel, AutoCAD is saying Already zoomed out as far as possible. I'm going to try pan. I'll hold the Wheel down, I'll try and pan this drawing over. Take a look at this, it's kind of like I'm panning into a brick wall, AutoCAD is not letting me to pan any further. This is another Regen issue. Remember that panning and zooming is taxing on your processor and video card. And if you've panned or zoomed a large distance, AutoCAD may ask you to regenerate the drawing before it allows you to pan or zoom further.
So let's launch Regen again. Here's a shortcut, we don't have to type the whole command. I'm just going to type re and hit Enter. When I do, I can now pan just fine and I can zoom as much as I like. Let's look at one more thing. I'm going to focus our attention on the Laundry Room area. If the time comes where you'd like to see the extents of your drawing, one quick way to get there is by double-clicking your Mouse Wheel. If I double-click the Wheel, AutoCAD will do a Zoom Extents and show me the visual limits of all of the geometry in my drawing.
Using Pan and Zoom, we can quickly move around in our drawing environment, no matter how large or small that environment may be.
Find answers to the most frequently asked questions about AutoCAD 2011 Essential Training.
Here are the FAQs that matched your search "":
Sorry, there are no matches for your search ""—to search again, type in another word or phrase and click search.
Access exercise files from a button right under the course name.
Search within course videos and transcripts, and jump right to the results.
Remove icons showing you already watched videos if you want to start over.
Make the video wide, narrow, full-screen, or pop the player out of the page into its own window.
Click on text in the transcript to jump to that spot in the video. As the video plays, the relevant spot in the transcript will be highlighted.