Start learning with our library of video tutorials taught by experts. Get started
Viewed by members. in countries. members currently watching.
Join Jeff Bartels as he covers the most important features of this industry-standard drafting and design application in AutoCAD 2011 Essential Training. This course begins with a tour of AutoCAD's interface and the tools used to create basic shapes. It then focuses on the methods used to modify and refine geometry while emphasizing accuracy and good habits to build a solid design foundation. The course covers using layers, line types, and colors to organize a drawing file and explains how to efficiently annotate a design and prepare it for final output. Throughout the title, Jeff shares industry techniques used in production and reinforces concepts using practical examples. Exercise files are included with the course.
Selecting our entities one at a time is okay, but it's not the most efficient way to work. In this lesson, we are going to learn how to select multiple objects by using a window. Now, we have touched on this concept already in some of the previous lessons, but in the interest of reinforcing efficiency, I thought I was worth giving the selection method a lesson all its own. On my screen, I have several shapes. Let's say I would like to erase these six circles. To do that, I am going to launch the Erase command and instead of selecting these guys one at a time, I am going to click out here in space and then I will pull down into the right and create a selection window.
This selection method will select everything that falls completely within this window. I am going to click right here to finish my window and then I'll right-click to finish the command. As you can see in just a couple of clicks, I was able to select all of those circles. Think about this for a second. The majority of the AutoCAD commands ask you to select objects. One of the best ways to increase your productivity is to master the art of making selections. I am going to click Undo to bring these circle back and this time, let's say, I would like to erase all of these rectangles.
To do that, I'll launch the Erase command. This time I will click to the right side of the geometry and I will pull it to the left. This selection is called a Crossing Window and this will select everything that falls completely within the window or crosses over the boundary. I am going to click right here to finish my window that selects all of those rectangles and then I'll right-click to finish the command. Once again, I was able to select all of those entities using only a couple of clicks. We can use the Window and Crossing Window selection any time AutoCAD asks us to select objects.
I am going to pan the drawing over, let me zoom out a little bit. On my screen, I have two mechanical parts. the part above is considered a finished part and the part below is unfinished. Let's see if we can use some selection windows to help us modify this part such that it looks like the part above. First thing I notice is the part on the bottom has to get a little bit longer. Currently, it measures 14.7 units and obviously, it has to be 18.7. So to make this longer, I am going to use the Move command and I would like to move the entire right side of this part so I am going to make a quick crossing selection.
That selects all of that geometry. I'll right-click and then I would like to pick my geometry up from the end point here and my Ortho happens to be locked which is good. I'll pull this to the right four units and hit Enter. Now I'll clean this up using the Extend command. I'll move up to the Modify panel and launch Extend, then I'll select my boundary edges. I am just going to make a quick crossing window. It doesn't hurt to select more than what I need. I'll right click when I am finished and then I'll extend this line segment and this one and when I am finished, I'll hit Enter.
Now let's take care of this whole that has these two slots. It looks like all we have to do is rotate this geometry 90 degrees. So I am going to launch my Rotate command and then I will make a window selection around this geometry. Notice, the only entities selected were the ones that fell completely within that window. I'll right-click and then I would like to rotate these around the center of this circle. Notice that AutoCAD is giving me a hard time finding that object snap because all of these end point are closer to my cursor. If you have to, you can always grab that object snap by moving to the center of the circle.
I'll click to select this and you know what, here's another shortcut. I want to rotate this 90 degrees. Since my Ortho is locked, I will use that to my advantage. I will just pull straight down and click and that gives me a 90-degree rotation. More than half of the work you do in AutoCAD will require you to make selections. Knowing how to use windows to select multiple objects is one of the fastest ways to increase your productivity.
Find answers to the most frequently asked questions about AutoCAD 2011 Essential Training.
Here are the FAQs that matched your search "":
Sorry, there are no matches for your search ""—to search again, type in another word or phrase and click search.
Access exercise files from a button right under the course name.
Search within course videos and transcripts, and jump right to the results.
Remove icons showing you already watched videos if you want to start over.
Make the video wide, narrow, full-screen, or pop the player out of the page into its own window.
Click on text in the transcript to jump to that spot in the video. As the video plays, the relevant spot in the transcript will be highlighted.