Viewers: in countries Watching now:
Discover the industry secrets to recording crisp, rich instrument tracks and vocals in any type of recording environment. Join renowned audio engineer Bobby Owsinski as he walks through the process of miking and tracking a complete song by Underground Sun recording artist Iyeoka and A-list session musicians in a top-of-the-line studio—in a way that is applicable to any recording space and musical genre. Learn how to select the correct microphone and polar pattern for each instrument, with hundreds of revealing listening examples for drums, acoustic and electric guitar, piano, keyboards, and more. These professional techniques offer critical insights for those just getting started in the recording process, and a trustworthy reference guide for more seasoned engineers. Bobby also demonstrates how to monitor and sculpt EQ settings, why and when to process your input signal, and how to choose the right outboard gear for the track. This course employs 360-degree, 3D visualizations that provide an unprecedented perspective of the equipment, players, and microphone placements discussed. Plus, with the raw audio files provided, you can critically listen to every recorded example at home with your DAW of choice at full 24-bit resolution.
Gain staging is the proper level setting of each section of the signal path so that none of them overload. Let's look at how to do just that. Since you may have several signal processors in your signal path while recording, it's important that any one of them isn't being overdriven. This may result in anything from the tone changing slightly to some outright hard sounding distortion. In most cases the signal path is going to be rather simple, which is the mic preamp into your DAW. In this case make sure that the overload LED isn't being lit on the mic preamp, if it is, back off on the input gain.
If it's still overloading engage the attenuator pad and readjust the input gain control. The next thing to check is your DAW. Is the level too hot? If so, back off to Trim control if there is one until a level reads about -10 dB. If your DAW doesn't have a Trim control then decrease the output level of the microphone preamp until the DAW level reads about -10. In this example, we've added an outboard EQ to the signal chain. Once again, we'll look at the preamp first to make sure that it's not overloading, then we'll look at the EQ.
If an overload LED is lit then you need to back off of the EQ's input gain control if it has one or the preamps output gain control if it has one. The ideal setting for both is about half to three quarters of the way up. If both devices look like the settings are in the right position then check your DAW levels as before. If the DAW levels are too hot back off of the EQ's output control until the record level is at about -10 dB. That's how we set the gain staging during recording, make sure that there are no overload LEDs lit anywhere, and that the record level ends up at -10 dB.
Adjust the input and output level controls to get the ideal levels.
There are currently no FAQs about Audio Recording Techniques.
Access exercise files from a button right under the course name.
Search within course videos and transcripts, and jump right to the results.
Remove icons showing you already watched videos if you want to start over.
Make the video wide, narrow, full-screen, or pop the player out of the page into its own window.
Click on text in the transcript to jump to that spot in the video. As the video plays, the relevant spot in the transcript will be highlighted.