Start learning with our library of video tutorials taught by experts. Get started
Viewed by members. in countries. members currently watching.
Discover the industry secrets to recording crisp, rich instrument tracks and vocals in any type of recording environment. Join renowned audio engineer Bobby Owsinski as he walks through the process of miking and tracking a complete song by Underground Sun recording artist Iyeoka and A-list session musicians in a top-of-the-line studio—in a way that is applicable to any recording space and musical genre. Learn how to select the correct microphone and polar pattern for each instrument, with hundreds of revealing listening examples for drums, acoustic and electric guitar, piano, keyboards, and more. These professional techniques offer critical insights for those just getting started in the recording process, and a trustworthy reference guide for more seasoned engineers. Bobby also demonstrates how to monitor and sculpt EQ settings, why and when to process your input signal, and how to choose the right outboard gear for the track. This course employs 360-degree, 3D visualizations that provide an unprecedented perspective of the equipment, players, and microphone placements discussed. Plus, with the raw audio files provided, you can critically listen to every recorded example at home with your DAW of choice at full 24-bit resolution.
You might be tempted to reach for the EQ when something doesn't sound right while recording, but as you see later in the course, there are much better ways to adjust the sound. That said, equalization can be a very powerful tool during recording under the right circumstances. Let's look at how that's done. First of all, for a complete explanation of all the various parameter controls and general EQ setup, check out my Audio Mixing Boot camp course or Foundations of Audio: EQ and Filters on the lynda.com online training library.
Now let's say that what you're recording still doesn't sound right after moving the mics, changing mics, and altering the signal path. Now it's time to try some equalization. The first thing to try is to cut a few dB from around 200 to 500 hertz. This is because it's one of the areas that will get a proximity effect boost when a mic is placed closely to an instrument or amp. If there is a frequency that seems to be sharp and piercing, set the boost cut control to a moderate level of cut. 8 or 10 dB should work. Sweep to the frequencies until you find the frequency area that really leaps out above all others, that's the frequency to cut.
Adjust the amount of cut to taste, be aware that too cut makes the instrument sound thinner. Sometimes you want to be sure that the instrument has a lot of definition. To do that you can go a few steps further, add some points to the sound by adding a slight amount of up or midrange from 1K to 4 kilohertz. Start with only a couple of dB, then add more to taste. If required, add some sparkle to the sound by adding a slight amount of high frequencies from 5K to 10 kilohertz.
If required add some air to the sound by adding a slight amount of the brilliance frequencies from 10K to 15K. Remember that it's best not to use any EQ while you are recording until you get a lot of experience and then a very few dB is all it should take. You can't undo it later when you add something during recording, so it's usually best to play it safe and record it flat, then improve the sound with equalization when you mix. In closing, if you must use EQ start by subtracting in the 200 to 500 hertz area.
Cut by about 10 dB and sweep the mid-frequencies of a sound that's sharp and piercing. Add some definition by adding a bit of point at 1 to 4K, some sparkle of 5 to 10K, and some air at 10 to 15 kilohertz.
There are currently no FAQs about Audio Recording Techniques.
Access exercise files from a button right under the course name.
Search within course videos and transcripts, and jump right to the results.
Remove icons showing you already watched videos if you want to start over.
Make the video wide, narrow, full-screen, or pop the player out of the page into its own window.
Click on text in the transcript to jump to that spot in the video. As the video plays, the relevant spot in the transcript will be highlighted.